LP Steel Industries

623.936.1996

LP Steel Industries logo (dark variant, for light backgrounds)

Rolled at our Stanfield line

Simulated clay tile metal roofing, made in Arizona.

The look of a clay-tile roof without the weight or the cost — a stamped steel tile profile that ships in long panels, installs fast, and carries a 40-year painted finish.

Simulated clay tile metal roofing on an Arizona building

Where it fits.

Homes & HOAs

Tile curb appeal with a roof a crew can install in a day.

Re-roofs

Lay over the existing deck — far lighter than a tile tear-off.

Arizona sun

A baked 40-year finish built for UV and monsoon heat.

The newest LP panel — made in Arizona

Simulated Clay Tile Roof Panel

The newest panel in the LP lineup is our simulated clay tile roof panel, manufactured at our Stanfield, AZ facility. It closely mimics the look of a clay tile roof with the benefits of lightweight steel, and is produced with a pre-painted 40-year finish. This steel panel is great for re-roofs and new construction, and is mechanically attached using paint-to-match fasteners — great for the do-it-yourselfer.

  • Available in 39.3″ coverage, produced in lengths of 4′–30′ — fewer seams means fewer chances of leaks over the long run.
  • Fire resistant — Class A fire rated and noncombustible when properly installed, great for fire-prone areas.
  • Longevity — lasts decades longer than asphalt; a shingle roof may need replacing three times before this metal roof does.
  • Weathering — stands up to high winds, heavy rain, hail, ice, and extreme heat and cold.
  • Minimal maintenance — most dirt and stains wash off in the rain; stubborn spots rinse with dish soap and a hose or light pressure washing.
  • Retrofit — can be installed over existing roofs to eliminate tear-off costs.
  • Material thickness — 26 ga.
  • Painted finishes — 40-year SMP painted domestic steel with matching trim profiles.
  • Minimum recommended slope — 3:12.

At a glance

Tile look, steel weight.

Profile — Simulated clay tile (stamped)

Sheet width — 39.3″

Gauge — 26 ga

Finish — 40-year SMP painted, tile-tone colors

Weight — ~1/10 the weight of real clay tile

Panel length — Cut to length

Simulated clay tile metal roof
Simulated clay tile roof detail
Simulated clay tile roof panel
Simulated clay tile roof install

Already have a spec sheet?

If you’ve got drawings, a takeoff, or a spec sheet, send it over and we’ll quote it directly — no need to build it below.

Build your order

Pick your panel and color, add trim, and add fasteners — all to one estimate.

STEP 1 — CHOOSE YOUR PANEL & COLOR

Square steel tube stocked at LP Steel in Arizona

Simulated Clay Tile Roof Panel

26 ga · 39.3″ coverage · 4′–30′ lengths · 40-yr SMP painted finish

Choose your color

Selected color: choose a color above

All 16 colors on 40-year painted coil. Swatches are a guide — see the real chip at any LP Steel Arizona store. Your color rides along on the estimate.

STEP 2 — ADD TRIM & ACCESSORIES

Ridge & hip cap
Caps the peak and hips
Eave & rake trim
Finishes the edges
Foam closure
Seals the tile profile

Custom, cut to order.

Tell us your run lengths and color and we'll roll it to order. Trim and flashing to match.

Simulated Clay tile roofing comes off our Arizona lines and ships statewide from our four stores — cut, finished, and quoted by the people who make it. One supplier, one estimate.

Made in Arizona.

Fasteners & accessories

Lap Screw (neoprene) — LP Steel

Tec screws (with washer)

Self-drilling metal-to-metal screw with sealing washer

Sold in bags of 250

Lap Screw (neoprene) — LP Steel

#14 lap screws (neoprene washer)

#14 lap screw with neoprene sealing washer

Sold in bags of 250

Lap Screw (neoprene) — LP Steel

#14 lap screws (zinc)

#14 zinc lap screw for panel side-laps

Sold in bags of 250

Lap Screw (neoprene) — LP Steel

#12 frame screws (zinc)

#12 x 3/4" frame screw, galvanized

250 / pack · galvanized

Lap Screw (neoprene) — LP Steel

#14 frame screws (zinc)

#14 zinc frame screw for metal framing

Sold in bags of 250

Lap Screw (neoprene) — LP Steel

#14 framing screws (zinc hex head)

#14 x 1 1/4" framing screw, galvanized

100 / pack · galvanized

Lap Screw (neoprene) — LP Steel

#12 x 3/4″ self-tapping screws (galvanized)

#12 x 3/4" galvanized self-tapping screw

Sold in bags of 250

Lap Screw (neoprene) — LP Steel

#9 wood screws (galvanized)

#9 galvanized wood screw for wood framing

Sold in bags of 250

Lap Screw (neoprene) — LP Steel

Wood screws (painted)

Painted color-matched wood screw

Sold in bags of 250

Add-ons & services

Round out your order.

Custom cut to order

Send a cut list or DXF and we cut, drill, and coat to your spec.

Delivery

Same-day pickup at any yard, or statewide delivery across Arizona.

LP Steel Industries flatbed delivery truck Arizona

Delivery and Loaders

LP Steel offers delivery anywhere within Arizona and surrounding states. We handle your materials with care and can take your materials to you without the hassle of leaving your front doorstep. Call us today to order materials and sched-ule a delivery date most convenient to you!

WE offer two types of delivery service the first is an economical solution where we arrive with the truck full of goods and the customer provides a means of off loading typically a tractor or a few people to assist. The secound option is we send a helper with the driver to assist in unloading. In the secound senerio we just unload at the curb of the property.

Get a quote

Tile look, manufacturer-direct.

One-business-day quote. Tell us size, quantity, and finish.